Select Page

FireStrip-ALX 1m for 35mm gap

$67.98 Exc. GST

FireStrip-ALX is elastomeric foam laminated with a graphite based intumescent compound. It is designed to perform as a 2 or 4-hour barrier in construction movement joints. Designed for long linear installations in horizontal and vertical applications.

FireStrip-ALX is a flexible water resistant seal that expands when exposed to heat. FireStrip-ALX has Acoustic Isolation to 22dB.

Part Number: BALX35 Categories: ,
Continue Shopping

Description

  • Box Quantity : 1
  • Colour : Black
  • Density : 75Kg per meter cubed
  • Dimensions : 53mm x 20mm x 1m
  • Length (mm) : 1m
  • Material : Laminated elastomeric foam with graphite based intumescent compound sided
  • Single Units : Yes

Product Information
Fire rated up to 240mins – Acoustic isolation to 22dB – Highly flexible and water resistant – Halogen free, resists fungi and vermin – Tested in linear joints up to 150mm wide, concrete floors, block wall, concrete and masonry – See MORE benefits below

FireStrip – ALX is elastomeric foam laminated with a graphite based intumescent compound on both sides. It is designed to perform as a 2 or 4 – hour barrier in construction movement joints . Designed for long linear installations in horizontal and vertical applications. FireStrip – ALX is a flexible water resistant seal that expands when exposed to heat. It can also be used as a fire barrier inside cable trunkings allowing for the installation of further cables.

Benefits
The advantages of FireStrip – ALX are:

  • Fire rated up to 240 mins
  • Acoustic Isolation to 22dB
  • Air Permeability testing to 600Pa – 100Pa
  • Tested in Block Wall, Concrete and Masonry
  • Tested in Concrete Floors
  • Tested in Linear Joints up to 150mm wide
  • Tested with Cables, Cable Bunches, Cable Trays and Cable Trunking
  • Contributes to Green Building
  • Joint movement capability of +/- 50%
  • Highly flexible and water resistant
  • Maintenance free
  • Available up to 150mm gap size
  • Halogen free, resists fungi and vermin

Installation

  • Ensure the surrounding area is free from dust.
  • Do not install against substrates that bleed oils, plasticizers or solvents.
  • Compress seal between fingers & press into place.
  • Ensure that core recovers and edge of the seal is flush with the face of the joint.
  • Seal can be cut easily with Stanley knife to give correct fitting path.

Specification

  • Colour – Black
  • Density – 75Kg/m3
  • Fire Resistance – Up to 4hrs
  • Acoustic Performance – Acoustic Reduction up to 8Rw, 22DnTW EN10140
  • Expansion Ratio – 25 times
  • Max. Size of Aperture – 150mm
  • Max. Size of Seal – 170mm (other sizes can be requested)
  • Seal Length – 1000mm
  • Seal Width – from 10-150mm
  • Movement Capability – +/- 50% (compression of 75% / expansion)
  • Compression – 75%
  • Expansion – 40%

Environment
FireStrip – ALX contribute s to a Green Building:

  • Low VOC (air quality)
  • No Power Tools required for installation (no energy source required)
  • Dust free
  • Low Ozone Depletion Potential (ODP)
  • Low Global Warming Potential (GWP)
  • No water pollution
  • Smoke and Air Tightness
  • Noise Reduction
  • Thermal Insulation
  • Recycling of Packaging
  • Avoidance of Air Filtration
  • Does not emit halogenated by – products
  • Contains no raw materials known to have an estrogenic effect
  • The life cycle of FireStrip – ALX is over 15 years

Storage & Disposal
FireStrip – ALX is not affected by outdoor environment. However, for long – term storage it is recommended that it should be stored in dry, frost free conditions below +30°C

Additional information

Weight 20 kg
TECHNICAL DATA SHEETS

TDS – BOSS FireStrip-ALX

SAFETY DATA SHEETS

SDS – FireStrip-ALX

NYC ESCORT