Passive Fire Protection Services in Perth & WA – Compliance, Safety & Reliability
When it comes to protecting lives and property, passive fire protection is your building’s first line of defence. At Safetytech Fire Services, we design, install, maintain, and certify AS4072.1-compliant systems that slow the spread of fire, protect escape routes, and safeguard critical assets.
With fully qualified and FPAA-accredited technicians, we deliver solutions that meet the highest Australian Standards while providing complete peace of mind. From commercial high-rises to industrial facilities and residential complexes, we ensure your building is compliant, safe, and ready in the event of a fire.
Introduction to Passive Fire Protection
Passive fire protection (PFP) is designed to contain or slow the spread of fire from its point of origin, giving occupants more time to evacuate safely while minimising damage to the building structure and contents.
The most effective approach is compartmentalisation – dividing a building into smaller, fire-resistant sections using fire-rated walls, floors, and barriers. These barriers limit the spread of flames, smoke, and heat, protecting escape routes and critical infrastructure.
At Safetytech Fire Services, we ensure every installation is fully tested, certified, and compliant with AS4072.1 and relevant National Construction Code (NCC) requirements. Our team works across Perth and regional WA, delivering solutions that are safe, compliant, and built to last.
Whether it’s fire-rated doors, wall penetrations, or complete compartmentalisation systems, our expert technicians have the experience, tools, and industry knowledge to keep your building protected.
Passive Fire Protection Systems & Components
Effective passive fire protection (PFP) relies on the correct design, installation, and maintenance of certified systems. Every component must be tested or assessed to ensure it maintains the required fire resistance level (FRL) of the building element it protects.
Fire Doors
Doorways within fire-rated walls must be fitted with fire-rated door assemblies. These include:
- Fire-rated frame – built to withstand high temperatures.
- Certified door leaf – tested to Australian Standards.
- Approved hardware – hinges, seals, handles, and closers must be rated for fire use.
For large openings up to 5 metres high and 8 metres wide, we install sliding fire doors, which are commonly used in industrial settings such as mines, warehouses, and manufacturing plants.
Our technicians have 20+ years’ experience in fire door installation, repair, maintenance, and inspection. We also hold asbestos handling licences, allowing safe replacement of older asbestos-containing doors still found in many WA buildings from the 1960s to the 1980s.
Fire Penetrations
Any service (pipe, cable, duct) passing through a fire-rated wall or floor must be sealed with a tested and compliant system to maintain both integrity and insulation.
Typical penetrations include:
- PVC plumbing pipes
- Electrical and communications cabling
- Sprinkler system pipes
- Mechanical service ducts
We use an innovative mobile app that identifies the correct tested system for each penetration type, provides detailed installation instructions, and ensures we supply all relevant test certificates.
Why Choose Safetytech for Passive Fire Protection
When it comes to passive fire protection in Perth and across WA, you need a provider with the technical expertise, proven compliance record, and commitment to safety to ensure your building meets every requirement — and performs when it matters most.
At Safetytech Fire Services, we offer more than just installation. We deliver peace of mind through quality workmanship, certified systems, and end-to-end compliance support.
WA-Owned & Operated
We’re proudly Western Australian, with a deep understanding of local building codes, regulations, and environmental conditions. Our solutions are designed for WA’s unique needs, ensuring lasting performance.
Fully Accredited & Qualified Technicians
Our installers and inspectors hold:
Cert III in Fire Protection
FPAA Accreditation
Asbestos Handling Licences (for removal of older fire doors)
Additional trade qualifications in electrical, plumbing, and carpentry were required.
Compliance Guarantee
All works are carried out in accordance with:
AS4072.1 and AS1530.4 for penetrations and fire-rated systems
AS1851.12 for inspection & testing
NCC 2019 fire compartmentation requirements
We provide full certification, labels, and test reports for every installation, ready for submission to building certifiers or fire safety auditors.
Premium, Tested Products
We only use world-renowned, rigorously tested fire protection products, ensuring:
Proven fire resistance levels (FRL)
Long-term durability
Manufacturer warranties and documented compliance
Over 20 Years of Experience
Our team has handled thousands of installations and inspections across WA, from high-rise commercial towers to remote mining facilities. We know what works, what passes inspection, and what will stand the test of time.
End-to-End Service
From design consultation and product selection to installation, maintenance, and certification, we manage the entire process, ensuring seamless integration with other trades and project timelines.
Tested & Compliant Systems
All PFP installations follow AS1530.4 and AS4072.1, as well as the NCC Section C3.15 requirements for service penetrations. This ensures:
- Correct fire resistance level (FRL)
- Approved installation methods
- Verified test reports from accredited laboratories
We work with world-class fire protection product suppliers, ensuring all materials meet Australian compliance and testing standards.
Compliance & Certification
At Safetytech Fire Services, we ensure every passive fire protection installation and repair meets or exceeds all relevant Australian Standards and National Construction Code (NCC) requirements.
All work complies with:
- AS4072.1 – Fire resistance tests for service penetrations and control joints
- AS1530.4 – Fire-resistance test methods for elements of construction
- AS1851 – Routine service of fire protection systems and equipment
- NCC Section C3.15 – Openings for service installations
Full Certification & Labelling
Upon completion, every PFP installation is:
- Labelled by AS4072.1
- Backed by independent third-party inspection reports (if required)
Supported with test certificates and assessments from accredited testing laboratories
World-Class Products & Proven Performance
We source products from internationally recognised fire protection manufacturers, ensuring every system is:
- Tested in approved Australian and global facilities
- Certified for the correct fire resistance level (FRL)
- Installed strictly according to the manufacturer’s and standards-based specifications
This commitment to rigorous compliance means our clients benefit from systems that not only pass inspections but also perform as intended in the event of a fire, protecting lives, assets, and operational continuity.
Maintenance & Inspection Services
Passive fire protection systems only perform as designed if they are regularly inspected, tested, and maintained. At Safetytech Fire Services, we provide comprehensive PFP maintenance programs that ensure your systems remain compliant, effective, and ready to perform when it matters most.
Routine Inspection & Testing (I&T)
Our Inspection & Testing division conducts:
- Fire Door Inspections – Every 6 months (sliding fire doors every 3 months) in line with AS1851.12
- Service Penetration Checks – Annually, as required by AS1851 and AS4072.1
- Compartment Integrity Testing – Ensuring all fire-rated walls and floors maintain their required FRL
Seal Integrity Verification – Checking for damage, deterioration, or improper installation that could compromise fire performance
Urgent Repairs & Upgrades
- Ensures Compliance – Avoid costly penalties and rectification works during audits
- Protects Life & Property – Maintains the integrity of fire compartments to slow fire spread
- Extends Asset Life – Reduces the need for premature replacement of fire doors, seals, and other components
Minimises Disruption – Scheduled maintenance can be carried out after hours to avoid interrupting operations
With Safetytech, you’ll have confidence knowing your passive fire protection systems are always compliant, fully functional, and capable of performing to their design specification in a real fire event.
Maintenance & Inspection Services
Passive fire protection systems only perform as designed if they are regularly inspected, tested, and maintained. At Safetytech Fire Services, we provide comprehensive PFP maintenance programs that ensure your systems remain compliant, effective, and ready to perform when it matters most.
Routine Inspection & Testing (I&T)
Our Inspection & Testing division conducts:
- Fire Door Inspections – Every 6 months (sliding fire doors every 3 months) in line with AS1851.12
- Service Penetration Checks – Annually, as required by AS1851 and AS4072.1
- Compartment Integrity Testing – Ensuring all fire-rated walls and floors maintain their required FRL
- Seal Integrity Verification – Checking for damage, deterioration, or improper installation that could compromise fire performance
Urgent Repairs & Upgrades
If an issue is detected during inspection, our fully qualified FPAA-accredited technicians can complete repairs immediately to restore compliance. We also offer system upgrades to meet changes in building use, new NCC requirements, or improved fire safety performance.
Why Regular Maintenance Matters
- Ensures Compliance – Avoid costly penalties and rectification works during audits
- Protects Life & Property – Maintains the integrity of fire compartments to slow fire spread
- Extends Asset Life – Reduces the need for premature replacement of fire doors, seals, and other components
- Minimises Disruption – Scheduled maintenance can be carried out after hours to avoid interrupting operations
With Safetytech, you’ll have confidence knowing your passive fire protection systems are always compliant, fully functional, and capable of performing to their design specification in a real fire event.
Construction Stage & Multi-Trade Integration
One of the most common causes of passive fire protection non-compliance occurs during the construction phase, when multiple trades are working on-site. If penetrations in fire-rated walls or floors are not sealed correctly from the outset, costly rework, compliance failures, and safety risks can occur.
At Safetytech Fire Services, we work proactively with builders, project managers, and all on-site trades to ensure fire compartment integrity is maintained throughout construction.
Pre-Construction Briefings
We offer short, targeted pre-construction education sessions for all trades involved in a project. These briefings:
- Explain NCC and AS4072.1 requirements for sealing service penetrations
- Identify common compliance mistakes and how to avoid them.
- Provide tested system installation methods suitable for different service types.
Reduce costs and delays by preventing non-compliant work before it happens.
On-Site Collaboration with Trades
Our qualified technicians work alongside electricians, plumbers, HVAC installers, and other service trades to ensure:
- Every penetration through a fire-rated barrier is sealed with the correct tested system
- No incompatible products are used that could void compliance.
Installation methods align with AS1530.4 and AS4072.1 fire resistance requirements.
Benefits of Early Integration
- Compliance from Day One – Avoid costly rectification works after inspection
- Streamlined Project Delivery – Minimise delays caused by re-work or failed approvals
- Long-Term Fire Safety – Maintain full FRL integrity of fire compartments
- Cost Control – Prevent budget blowouts from unplanned remedial works
By integrating passive fire protection expertise into the construction process, Safetytech helps builders and project teams deliver safe, compliant, and inspection-ready buildings without last-minute surprises.
Frequently Asked Questions
1. What is passive fire protection in buildings?
Passive fire protection (PFP) is a set of building measures, like fire-rated walls, doors, and compartment seals, designed to slow the spread of fire and smoke. It buys time for safe evacuation, limits structural damage, and helps buildings meet Australian fire safety standards.
2. Why is passive fire protection important in Perth buildings?
In Perth and across WA, PFP is critical for protecting lives and property. It helps contain fires within designated compartments, safeguards escape routes, and ensures compliance with AS4072.1 and the National Construction Code (NCC).
3. What systems are included in passive fire protection?
Passive fire protection systems include fire-rated doors, sliding industrial fire doors, penetration seals for pipes and cables, compartment walls, floors, and certified barriers. These are all designed and tested to maintain the building’s required fire resistance level (FRL).
4. How often should passive fire protection be inspected in Australia?
Under AS1851.12, inspections should be done every 6 months for fire doors (3 months for sliding doors) and annually for service penetrations. Routine checks ensure compliance, maintain system integrity, and extend the lifespan of fire safety assets.
5. Can old asbestos fire doors be replaced?
Yes. Safetytech Fire Services holds asbestos handling licences, allowing us to safely remove and replace asbestos-containing fire doors, which are still found in many WA buildings built between the 1960s and 1980s.
6. Does Safetytech provide passive fire protection in regional WA?
Yes. We service all of WA — from Perth metro areas to regional and remote sites — with mobile teams of qualified FPAA-accredited technicians, ensuring fast, compliant, and reliable fire safety solutions.
7. How do I choose a compliant passive fire protection system?
Choose systems tested to AS1530.4 and installed per AS4072.1. Always request compliance certificates and ensure the provider uses accredited products and qualified installers. Safetytech supplies full certification and test reports with every job.
8. How can I get a passive fire protection quote in WA?
Simply call our 24/7 helpline or request a free online quote. We’ll assess your site, recommend AS4072.1-compliant solutions, and provide transparent pricing with no hidden costs.